Survival X-Bow

This was requested by one of my followers, its “still in the works” because i wanted a professional archer to give it a go and give me feedback on how well it works as I’m no expert and I only shoot bows for fun.

Its intended to an all in one survival tool so i will be adding a few more accessories in the future. I also tried to use bearings in the pulleys but they didn’t affect shooting much so you can def get away with just solid pulley.

Print Settings:
25% infill
8 walls on most parts except the pulley, Band Mounts & WB which I used 12 to make sure it does not flex
Supports only for the frame, NO Brim or Raft required, Long and easy print 😉

BOM:
Pully:
M6 60mmL Furniture screw x2

Grips:
M3 12mm L x2
3mm 22mm L x2

Rubber Holders:
M5 30mm L x2

Band Aligners:
3mm 14mm L x4 pins

P Rail:
M3 20mm L x1

Attachments/Accessories:
M6 40mmL Furniture screw + Barrel nut (Some require more than one set)

Fishing Reel:
Winding Handle
M6 60mmL Furniture screw

Spool
M6 60mmL hex screw + Lock Nut
Bands cut 50mm from each end to give you the equivalent of a 30lb bow at 28″ draw length. If you cant find the exact ones you can use any tube band with 8mm OD and 4mm ID x 180mm L… https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html

If you are interested in other prop firearms, Airsoft parts and designs do join our group on Matrix:
https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org

Credits:

Dr.Mussy

Download 3D models

File	File size
Survival+X-Bow	13 MB