                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2235516
Nintendo Switch Arcade Cabinet by SSilver2k2 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

# Summary

Nintendo Switch Arcade Cabinet (Laser Cut)
========================


Wanted to try my hand at a mini Nintendo Switch Cabinet for Maker Faire.  Mocked this up.  Will be iterating while I wait for Maker Faire to arrive :D

Uses 3/16" material.  I have been using Elmers Foamboard for my prototypes.  It's about ~$3.00 for a 20"x30" board from Target / Walmart and it cuts great on a laser cutter. 

May 15th 2017 - v.0.1.5 - Added back brace and front lip to keep Switch in place without having to use kickstand.

June 1st 2017 - v.0.1.6 - Made some areas a little taller to lessen the gaps.  Cabinet survived a trip to Megacon 2017.

June 17th 2017 - Added updated SVG with correct DPI.  AI file is fine, but SVG was set to wrong DPI causing a 20% size reduction.


### Laser Cut Files

5mm Wood or 3/16" Foam Board thickness required for items to fit together.

Piece Sizes (Inches)

Back
7.4444 x 8.606

Base
7.4375 x 4.1339

Braces
7.4514 x 1.977
7.0866 x 0.6481

Control Panel
7.4526 x 3.3252

Marquees
7.4549 x 1.977

Sides
7.7643 x 10.3895

Top
4.8819 x 7.4514