PiStand, Copyright (c) 2017 Herb Weiner <herbw@wiskit.com>. 

Problem: When the NW Digital Radio UDRC™-II (Universal Digital Radio Controller) (http://nwdigitalradio.com/product/udrc)
is used with the SmartiPi Touch Case for Raspberry Pi (https://www.adafruit.com/product/3187), there is not sufficient
clearance for the DIN6 Cable required to connect the UDRC to the radio.

These extenders (two required) raise the display 1.5 inches, which provides sufficient clearance for the cable.

Note that an extra pair of 10-32 x 0.75 inch bolts is required. I purchased a pair of black button head socket cap bolts,
to match the bolts provided with the SmartiPi Touch Case. Also note that 10-32 nuts apparently come in at least two sizes.
The smaller size (0.310 inches) was supplied with the SmartiPi Touch Case. but the larger size (0.365 inches) is more readily
available, and is the only size I was able to find. You will need four matching nuts.

I have provided two versions of the PiStand. The small version requires the smaller nuts. The standard version requires
the larger nuts.
