                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2860856
RPi Zero HyperPixel camera case by mashiara is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

A case to hold RPi Zero, PiCamera (in my case NoIR version) and the Pimoroni [HyperPixel](https://shop.pimoroni.com/products/hyperpixel) display.

Cut a small square of the "superblue" filter that comes with the NoIR camera and dropped to the hole that holds the camera in place.

The Micro-HDMI -> HDMI adapter provider friction-fit to hold stuff in place when lid is not there.

v2 lid has thinner top (the part that covers the non-viewable area of the display), I did not test-print that, just figured after printing the first one that it might be a good idea.

# Print Settings

Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 15%

Notes: 
Fast settings Printed on NGen but anything should work, If you have super-well tuned printer maybe the bridges don't need supports.

# How I Designed This

Looked up the footprint for RPi zero to get accurate hole positions without messing about too much. 

Rest is just measured things with calipers and then modeled a simple case in Fusion 360 (Download design files from <https://a360.co/2HnaCGS>).