                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2912399
Arca Swiss camera plate clamp (very strong) by PaulTheSimon is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

This is a clamp I made to hold cameras on Arca Swiss mounting plates.
I've used this on a shoulder rig and other various mounting solutions. 
When printed right, it's incredibly strong. I've been unable to forcefully separate a plate from this clamp, however I'm sure some of you will be stronger than me :)

It has 4x M4 sized holes for mounting on whatever you may need.
If you require other mounting solutions, drop a comment.

Required parts:
2x M6 bolts
2x M6 nuts

# Print Settings

Printer Brand: FlashForge
Printer: Finder
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2 or smaller recommended
Infill: ~20%

Notes: 
These parts have a very critical function, which is to keep your camera from smashing into the ground - so use lots of wall segments! I recommend 4 or 5.

# Printing orientations!

![Alt text](https://cdn.thingiverse.com/assets/7d/df/2b/f3/4e/Orientation.png)
Correct orientations are important for optimal strength. Furthermore, this eliminates need for support.