                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3551136
Eurorack patch cable holder (parametric) by stillwideawake is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

Ok, here is a holder for Eurorack patch cables that is somewhat parametric. I am new to sharing stuff on thingiverse so hopefully this works as I assume it should. I have included the Fusion3D file, where you can change parameters for arm spacing, arm width, arm quantity and a few other things. Some values such as setting the arm width too low will make the model wonky, but after testing a few values on quantity and spacing it seems to work well enough. If there is something I need to change or improve don't hesitate to tell me, I am quite new to parametric modelling so I am sure I have made some mistakes :)

The STL I have included has a 4mm spacing between arms.

You will probably get away with not printing supports for the screw holes if your printer is well calibrated.

# Print Settings

Printer: Wombot Exilis
Rafts: No
Supports: Doesn't Matter
Infill: 100%
Filament_brand: eSun
Filament_color: White
Filament_material: PLA+