                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2437573
GTA 5 rail gun full scale  by full_filament is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

Do you like GTA 5, have 2 spools of black filament, and 84 hours to spare? Well, why don't you print the railgun? this is a 1:1 scale of the railgun that can be acquired in story mode and some online missions.  It has a removable mag and can light up with theses lights: https://www.amazon.com/gp/product/B00EZMGHLU/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1. I just wound the EL wire up and down both sides until all the rail was covered.  To paint the rails I just covered up the black parts with painters tape and used silver spray paint to paint the center.  The fit for the wire might be a little tight but I found if you remove the clip on the back and file out some of the holes it fits nicely.  Finally, I used a bolt for the stock adjustment.