                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2450244
Mini Shoe Camera Handle by Matesaktesak is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

Last weekend I was filming a lot with glidecam and my arm really hurt. I know I can purchase the glove, but for now, I want to reduce the carrying weight on my right hand, at least while not filming. This handle should help with stabilization at near-ground shots and can be used just as simple carrying handle. I hope you will put it in to good use.

**Also in the projects files tab, you can find my GCode for Prusa MK2 (PET)**

# Print Settings

Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: Doesn't Matter
Supports: No
Resolution: 0,4(nozzle) 0,2(layer)
Infill: 0%

Notes: 
#240C Hot-end
#90C Bed

**Printed in Fillamentum PETG (white)**, 4 perimeters, 5 top infill layers

# Post-Printing

## Finishing

###Grip
I recomend to sand the whole part, than you are touching and if you are able, get some very big linear ballons and put a piece of it on the handl. It isn't necessary, but it gives much nicer grip.

###Mini Shoe
Only one modification is needed to be done to the bottom part. About 2mm from bottom there are **two grooves** visualy separating the upper part from the downer. Every camera has diferent gripping notch thickness so you would need to eventualy **file** it to the right size.

## Optional

Maybe you would need to break the two slim pins at bottom to decrese hazard of breaking them in the camera it self.

![Alt text](https://cdn.thingiverse.com/assets/a0/28/98/4c/93/chosen_IMG_0226_LI.jpg)
The missing breaken out pins circled