                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2916896
SPIDER by Metac is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

Loose, stray cables are always my issue. So, in order to keep them tidy, I am looking for some sort of solutions. One day, this spider like thing come to my mind and printed several copy of it. So far it helped me to organized my small and slim cables. At least, it prevents the cables from tangling with each other in drawers. I try to make it thin to give it a flexibility but not too thin. It needs to have some degree of flexibility to accept cables into its eyes. 
I used again my favorite material PETG to print this out. Please see some of my Cura settings below. 
Happy printing :)

# Print Settings

Printer: Anycubic i3 Mega
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2
Infill: 50

Notes: 
PETG. 
Nozzle Temp : 233 degC, 
Bed Temp : 85 degC
Print Speed : 40 mm/sec
Wall Speed : 25 mm/sec
Travel Speed : 300 mm/sec
Retraction : Yes, 3 mm, 70mm/sec