                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:1860391
3D_Print_Shoulder_Rig_V2.0 by swanglei is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

# Summary

I have designed my second version of the follow focus just like the pictures,but I wil publish it on the other "thing",after I finished my total tutorial,i will stick the link to  this theme。(this design I knowed that it is a little difficult for makers to make one because it needs some customed made part like the worm gear ,that most of you i think you don't want to buy)

This version of shoulder rig had solved some problem in the first version,if you are interest in this design ,you can also check my previous design on this link:http://www.thingiverse.com/thing:1571731

And the screws is still not been sorted out yet,I will finished it soon and upgrade this theme later.

And the worm gear link:https://item.taobao.com/item.htm?spm=a1z09.2.0.0.NGtbdA&id=17352109451&_u=765kgh64ed9
I really don't whether you guys can open it and buy it.....

and the rod that worm gear needs is 4mm&6mm
(if you buy it maybe you need to buy too )
and you can get it too from the same place,and the links is:https://item.taobao.com/item.htm?spm=a1z09.2.0.0.NGtbdA&id=45114001387&_u=765kgh6babe

the gears is all the same with the first version...

by the way, my brandnew twitter:https://twitter.com/Swanglei_DF

# Print Settings

Printer: DreamMaker
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 40%

Notes: 
Important things:

These parts should be printed twice:
Handle_rig_down.stl
ScrewNorb.stl

These should be printed twice but the second one is mirrored:
Handle.stl
Handle_Beam.stl 


most of the parts is printed for 20% infill and some parts that should be stronger I printed them for 40% infill.


# How I Designed This

Screws that needs:
M3_8mm      4pics
M3_25mm    2pics
M4_16nn      4pics
M4_20mm    1pics
M6_50mm    1pics
M6_20mm    6pics
M6 nuts        3pics

30mm_37mm_4mm bearing   2pics
15mm carbon fiber tubes (total : 1M~2M)