                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:2076220
Mini 10keys Keyboard by gmanzato is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

*A mini 10 keys keyboard.*

**Parts :** 
* 10 key switch. ( Cherry MX or compatible , gateron... ) 
* 1 Teensy 2
* 10 keycaps ( I printed them ,design will be uploaded soon )
* 4 M4 threaded Inserts
* 4 M4x12 screw

**Software : **
You can use https://github.com/GManzato/qmk_firmware/tree/master/keyboards/mini10k , it's a fork of the qmk firmware. For now I've just implemented a basic numkey keyboard

**Pinout for the Teensy : **
Row : F5, F6, F7, B6
cols : F0, F1, F4


# Print Settings

Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 35

Notes: 
I used ColorFabb PLA Black. PLA is quite easy for this project and enough stiff. ABS will be a bit more difficult since you need precise dimensions

# Post-Printing

Just add the threaded instert with a soldering iron.