                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2923584
OnePlus 5T Music Dock by ThoreJ is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

Just a thing I made to practice my 3D drawing skills after seeing one like it for an Iphone7

It does make the music sound surprisingly loud and it adds that old grammophone sound to. It's also really good if can't hear your alarm in the mornings!!

It's designed so it's big enough to be used with the OEM bumper cover on. It can of course also be used with out... 
OnePlus 5 should also fit as the 5 and 5T have almost same dimensions


The 3D file can be found here on my OnShape profile if someone wants to remix for another phone https://cad.onshape.com/documents/9a08939dbc40ab666601919d/w/ee3b34f2c475daf611126ef1/e/93bfd2305187b9df4672bda3 

# Print Settings

Printer Brand: Creality
Printer: CR-10S
Rafts: No
Supports: No
Resolution: 0.2 (or 0.12 for quality)
Infill: Base 25%, Horn 0%

Notes: 
Print separately - on different settings as above

When printing the horn, print it standing on the wide end and remember to set top and bottom layers to "0" and infill to "0"% otherwise it won't be open in the ends.