                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:729029
3D printable VR Headset for smartphones by AZ360VR is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
http://creativecommons.org/licenses/by-nc-nd/3.0/

# Summary

QR Code for calibration added thanks to BIG-E !!!!

Printable VR Headset for up to 5.5 inch smartphones. 
Check Play Store for VR Apps.  
Best App for movies is called "GoShow".   

http://youtu.be/HP66i6zdx3U  

http://www.arizona360vr.com/data/AZ360VR_assembly_instructions.pdf   

Check out the  SinfoniaSam's YouTube Special:  
https://youtu.be/_I9uWayy394  

UPDATE!  
Added the file lenses_new.stl with slightly a different thread style and clearance. If you have trouble with printing the threaded lens-cup use this file instead.

# Instructions

All Files can be printed with 0.2 mm layer height.

You will need:  
2 UltraOptix Pocket LED Lighted 7x Magnifier   
8 machine screws and nuts M3  
2  extension spring 1/8 x 1/2 inch or 0.016 inch music wire to make your own  
14x14mmx500mm foam strip  
1000mmx38mm heavy stretch waistband elastic  
super glue  

if you prefer to sew the head strap use "strap_for_sewing.stl"  
try static_lenses.stl instead of lenses.stl if you have normal vision.