                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3367703
Rotary supports for smartphones up to 8x15 cm by marcinszydlowski is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

Hello,

once upon a time... I ate my breakfast and realized that reading or watching media would be better when I'll prepare support for my phone with ability to fast switching between videos or lists. I've prepared three variations of thisthing:

- "claws" - minimalistic (requires 2 set screws 5x6 mm to connect swivel halves)
- "heavy" - ascetic, thick and rigid
- "snake" - thinner and wider than heavy but more stable and with different holes

Parts and quantities:

**Claws**

|Name|Qty|Printing time (full speed)|
|---|---|---|
|Claws 01 Swivel half|1|31m|
|Claws 02 Swivel half (with holes)|1|30m|
|Claws 03 Support|1|5h 1m|
|Claws 04 Handle|1|2h 14m|

**Heavy**

|Name|Qty|Printing time (full speed)|
|---|---|---|
|Heavy 01 Swivel|1|40m|
|Heavy 02 Support (left)|1|6h 34m|
|Heavy 03 Support (right)|1|6h 32m|
|Heavy 04 Handle|1|2h 31m|

**Snake (has the same handle "Heavy")**

|Name|Qty|Printing time (full speed)|
|---|---|---|
|Snake 01 Swivel|1|31m|
|Snake 02 Support (left)|1|5h 34m|
|Snake 03 Support (right)|1|5h 45m|

I've uploaded an assembly guide for "Snake" ("Heavy" has the same procedure) and for "Claws" on YT:
https://youtu.be/TK19OXBIItE
https://youtu.be/WjyW0SiWTf8

# Print Settings

Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.2 or 0.1
Infill: 10%
Filament_brand: FED Filament
Filament_color: it's your choice
Filament_material: PLA

Notes: 
Parts are big (> 10 cm) so I recommend to use glue when you'll chose PLA. I have not tried other materials.
"Snake" requires supports with overhangs setting >45deg. (ex. 60).