                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:1460181
Compact Camera Tripod - foldable by Kernel770 is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

Hello!
Since I haven't found a compact tripod here on Thingiverse, I've decided to design one.
It's very compact but also rigid, it can support a DSLR camera with ease.

Check out the mobile phone mount I made for this tripod: http://www.thingiverse.com/thing:2221802

No matter if you are at home or outdoors, this tripod is very handy and folds into a very small package. Plus, there are only four files for you to print and very few other components you'll need.

Have fun!!

# Print Settings

Printer Brand: RepRap
Printer: Pro Mendel
Rafts: No
Supports: No
Resolution: 0.5 mm Nozzle - 0.3 mm Layer height
Infill: as you like

# Post-Printing

## Nuts and bolts

2x self-locking nuts M5
3x washers M5
1x wingnut M5
2x bolts M5 - 16 mm long
1x bolt M5 - 60 mm long
1x 1/4-20 UNC bolt for the camera (or a bolt off another tripod)

# How I Designed This

For me, it was important that the parts come ready-to-use out of the printer - so there is a little chamfer everywhere to make them have a pleasant feel in your hands.

![Alt text](https://cdn.thingiverse.com/assets/48/8e/08/60/5d/20160402_140025_-_Kopie.jpg)

![Alt text](https://cdn.thingiverse.com/assets/f7/28/4f/e7/fa/screenshot.jpg)