                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:1678678
Threaded SD card holder by Furious007 is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

This is a threaded micro SD and SDHC card holder, I got my inspiration from both the SD card holder from n2b8 (http://www.thingiverse.com/thing:1322805) and the micro SD card holder from bgill (http://www.thingiverse.com/thing:1289250) I posted this as a remix to give them both credit as this is not an original model however it I made it from scratch using fusion 360 so the model is mine. 
I was looking around for a micro SD card and regular SD card holder to store my camera sd cards (I have two which use different sized cards) But I couldn't find a holder that either had a lid which would keep them together when travelling, or had slots for both types of card rather than one or the other. So I came across the two holders from n2b8 and bgill, which then gave me the idea to combine the two. please note the threads are a little tight and will need wearing in a bit, I did this by just twisting several times then ( or opening and closing it) but do this gradually as I found with PLA it fractured on the first time. once the threads have been worn in make sure to clean them as PLA dust can build up.

P.S I will upload the final hotos soon but have been having some extrusion issues as of late so the final pieces are very poor.

# Print Settings

Printer: CTC Bizer
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 20%

Notes: 
both files can be printed without supports as the fillets on them both aren't big enough over hangs to be an issue and a raft is also not necessary.