                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2981843
Companion Cube - Box by Nuk1591 is licensed under the GNU - GPL license.
http://creativecommons.org/licenses/GPL/2.0/

# Summary

This Companion Cube consists of separated parts to be able to print it with different colors and to use it as a storage box (hollow space: 99x99x99mm).

The parts made from the original model were not really symmetrical and so I made a few adjustments.


# Print Settings

Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 10%

# Instructions

You need the following quantity to build this Companion Cube (color/material is your choice off course):

6x Body_plate
6x Heart_insert
6x Heart_medal
8x Edge
12x Angle

In my case, I was simply able to press (with a bit of force) the “Heart_insert” parts into the “Heart_medal”s. The same applies to the medals and “Body_plate”s (rotate the medal in 90° steps if it does not fit). Tip: print each part once and test if this works. Otherwise process (rescale for example) the parts accordingly.

The “sticking_tool_top” and “*_bottom” are used to fix the plates and edges after applying glue on them (look at the photos to get the idea).