                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2897660
8 Inch Tablet Stand by dehart007 is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

I have a few extra old 8 inch tablets that I wanted to re-purpose.  I happen to have two 3D printers and two little laser engravers.  So I figured I'd connect the tablets directly to them as touch screens to control them.  So I created a 8 inch tablet holder that has opening at the top and side for access to the ports.  If you happen to have a tablet with holes on the right you can bring this design into tinkercad and use the hole tool to open up the right side.  I also purchased the OTG adapter that allows me to charge the tablet at the same time I can connect usb to computer/mouse/keyboard etc.  

The OTG adapter is here --> https://www.walmart.com/ip/4-Port-Micro-USB-Host-OTG-Hub-Power-Adapter-Charging-Cable-for-Android-Phone-Tablet-PC/971642870

In the next few days I'm going to 3D print a holder for the OTG adapter and incorporate it into this tablet design.  I'll update this post with the OTG adapter holder link as soon as its completed.


# Print Settings

Printer Brand: Creality
Printer: CR-10
Rafts: No
Supports: No
Resolution: .1
Infill: 15

Notes: 
I used Hatchbox PLA at a temp of 235 and a bed of 68

# How I Designed This

I used Tinkercad to do the design and I inclined the tablet at a 45 degree angle