                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2856520
Smartphone Charging Holder by paulbernhardb is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

My girlfriend needed a place where she can charge her phone overnight, because there wasn't enough space to fit a nightstand between the bed and the door. This made me design and print this smartphone holder that replaces the frame of a power outlet. 

The inner width of the frame is 60mm. 

It was designed to fit a Sony Xperia X Compact or any other phone with a size of 129mm x 65mm or less.

# Print Settings

Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 Plus
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 30

Notes: 
I've included two .stl files:

- A file that prints without supports (Schuko_Smartphone_Holder_v#.stl)
- and one that needs supports (Schuko_Smartphone_Holder_with_Spacer_v#.stl)

I experienced that the one with the spacer is more rigid because it touches the wall on the outside of the frame. 

# Post-Printing

Turn off the power for that outlet when installing!
Only install when you know what you are doing!

# How I Designed This

I designed it using Autodesk Fusion 360.