                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3617758
SQ11 MINI CAM HOLDER by John8 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

# Summary

This is a SQ11 Mini Camera Holder for mounting the camera on a RC Airplane or whatever you want to bolt it to. It uses a #6-32 Machine or #6 Wood, Flat Head Screw to Attach it to a Tail Clip or anything you need to fasten it to. A #6-32 SHCS can be used at the back to lock in the camera. The camera can be mounted forward or backward in the holder. Tail Clip will hold a #6-32 nut (Firmly Now).

# Print Settings

Printer Brand: Anet
Printer: A6
Rafts: No
Supports: No
Resolution: 0.1mm x 0.4mm
Infill: 20% but could be more.
Filament_brand: iPRINT 3D, HATCHBOX, Tianse, etc.
Filament_color: Blue or whatever works
Filament_material: PLA, PVC, PETG

Notes: 
For most prints I used Blue PLA with an extruder temp of 220ºC, bed temp at 45ºC, fan at 32% after the bottom layers are printed.