                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2449885
Camera Mount for Rockler Magnifying Lamp by webaugur is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

I wanted to mount a camera facing my work so I can livestream.  I have a magnifying lamp from Rockler at  my workstations.  So I created a quick and simple mount.

# Print Settings

Printer Brand: SeeMeCNC
Printer: Rostock MAX v2
Rafts: No
Supports: No
Resolution: 0.6mm
Infill: 50%

Notes: 
Walls are setup for a 0.6mm nozzle.  A 0.3mm would also work.  I use 6 exterior layers on all faces.  I would specify 12 outer layers if I had used the 0.3mm nozzle.  This isn't really expected to bear any load but it does compress around the gooseneck a bit to keep from slipping. A good solid surface seems best.

# How I Designed This

![Alt text](https://cdn.thingiverse.com/assets/57/75/0a/71/05/Camera_Rockler_Lamp_Mount_v2.png)
I sketched the more complex face.

![Alt text](https://cdn.thingiverse.com/assets/43/55/b7/d5/4e/Camera_Rockler_Lamp_Mount_v3_extrude-fix.png)
Select the parts of the sketch to extrude.

![Alt text](https://cdn.thingiverse.com/assets/98/19/a7/8e/3d/Camera_Rockler_Lamp_Mount_v3_-_extruded.png)
The bolt head will be about 15mm so I extruded it to a height of 20mm.

![Alt text](https://cdn.thingiverse.com/assets/a1/78/63/df/31/camera_mount_side_view.png)
And then I created a sketch that put a hole exactly in the center of the area where the bolt will go.  And then extruded/cut the hole for the bolt.

![Alt text](https://cdn.thingiverse.com/assets/e0/d1/78/a4/fc/Camera_Rockler_Lamp_Mount_2017-Jul-24_09-04-44AM-000_CustomizedView11442699247.png)
This is the final render of the part before sending to the 3D printer.

![Alt text](https://cdn.thingiverse.com/assets/13/43/48/19/cb/Camera-mount.png)
Setup the 3D print job using Simplify3D and send it to the printer via USB.

<iframe src="//www.youtube.com/embed/LJSqE7gzKXc" frameborder="0" allowfullscreen></iframe>
Installing the camera mount on the lamp!