                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:2740279
OpenForge 2.0 Bases by devonjones is licensed under the Creative Commons - Attribution - Share Alike license.
http://creativecommons.org/licenses/by-sa/3.0/

# Summary

This contains all the bases that have been designed that are intended for use with the tiles from the OpenForge 2.0 Dungeon Stone set.

For instructions on how to get started with OpenForge, we have a set of [tutorials](https://github.com/devonjones/openforge-tutorials/blob/master/README.md). Want to sell OpenForge prints?  Want to use OpenForge designs in your product, check out the [license](https://github.com/devonjones/openforge-tutorials/blob/master/license.md) FAQ.

OpenForge is now a [patron](https://www.patreon.com/masterworktools) supported project.  I use the resources that my patrons give me in order to get the resources to let me create more sophisticated tiles with a greater level of detail.  Please, support me, and I’ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our:

* [Online catalog and backer site](http://openforge.masterwork-tools.com/)
* [Website](http://masterwork-tools.com)
* [Forums](https://reddit.com/r/OpenForge) (Mostly we use facebook now)
* [Twitter](https://twitter.com/MasterworkTools)
* [Facebook](https://facebook.com/masterworktools/)

# Instructions

There are three factors to consider when selecting a base.

1) The tile size.  This will match between the tile and the base, such as 2x2 or 4x2.

2) What size basis do you want the tiles to be in.  There are three choices:

* 25mm - every square is 25mm on a side.  This is compatible with Dwarven Forge.  There is no need to scale the tile top with 25mm.
* inch - every square is 1 inch (25.4 mm).  This is compatible with Printable Scenery (OpenLOCK), DragonLOCK and HirstArts.  Scale the tile top when you print it by 101.6% in the X and Y axes.
* wyloch - every square is an inch and a quarter (31.75mm).  This is compatible with hero's horde and wyloch tiles.  Scale the tile top when you print it by 127% in the X and Y axes.

3) What connection system do you want to use.  We offer 4 connectivity options:

* Magnetic - uses 5mm spherical magnets.  1 each along the center of every square that is on the edge of the tile
* Magnetic + OpenLOCK - uses 5mm spherical magnets.  1 each along the center of every square that is on the edge of the tile.  Also has an OpenLOCK connector at the vertice between each square.
* OpenLOCK - Has an OpenLOCK connector at the vertice between each square.
* OpenLOCK Triplex - Has an OpenLOCK connector at the vertice between each square, and at the center of each square.
* Dragonlock - Has a Dragonlock connector at the vertice between each square.
* Magnetic + Dragonlock - uses 5mm spherical magnets.  1 each along the center of every square that is on the edge of the tile.  Also has a Dragonlock connector at the vertice between each square.
* Infinitylock - Has an Infinitylock connector at the vertice between each square, and at the center of each square.
* Magnetic + Infinitylock - uses 5mm spherical magnets.  1 each along the center of every square that is on the edge of the tile.  Also has an Infinitylock connector at the vertice between each square.

## Other Dungeon Stone Tiles

You can find the rest of this set as it gets released in the [OpenForge 2 Dungeon Stone Collection](https://www.thingiverse.com/devonjones/collections/openforge-2-dungeon-stone-series)

## Changelog

* 2018/05/16 - Added diagonal bases
* 2018/09/28 - Added curved bases
* 2018/10/14 - Major base update. Every base updated.

1. Added supports to openlock bays.
2. Added a bevel at the bottom of the bases so that they don't "elephant foot" on the first layers.
3. OpenSCAD code has a major refactor.
4. Files organized into zip files.
5. All base sizes and locking mechanisms got: curved 4x4 notch, and the 6x6 & 8x8 a, b & c bases.
6. Other changes that will be announced later.  

* 2018/10/22 - Added Dragonlock and Infinitylock!
* 2018/10/30 - Added Dragonlock bases for 1x1, 1x2, 1x3, 1x4
* 2018/11/14 - 6x6 and 8x8 bases needed to be fixed for every type.  Added concave bases.
* 2019/01/25 - 4x4 a, b & c added
* 2019/04/15 - Added magnetic.openlock.topless.
* 2019/05/25 - added Dragonlock bases for 6x6 & 8x8 a, b & c Curved.