                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2980235
Phone Head by JobSmolders is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

# Summary

Phone Head is an universal phone holder in the form of a robot body.
His joints can be fastened in various positions. This way the phone holder can be made fit to hold on anything :-). Also he can sit as a human or hang on to something as a monkey :-). His hands and feet can be opened and closed for gripping stuff. On his back he has an bracket so you can hang him on the wall on a nail or something :-)

“pin 1.stl” & “pin 2.stl” are printed in 0.1mm resolution and very slow with a lot of cooling in PLA. The other parts are printed in PET-G, 0.2mm resolution.
To assemble pin1 & pin2 please see picture. 

parts list:

-9X M3x30mm bolt (although I used some 40mm instead because that was what I head)
-6X M3x20mm
-4X M3x15mm (but I just put in 10mm ones. The bolts made their own treats :-) )
-18X M3 nut
-6X M3 washer (optional)
-1X M4 treated rod 96mm. (Length depend on phone dimensions)
-2X M4 nut

if you have any questions, feel free to ask :-)

If you think I forgot something, feel free to comment :-)