                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3476260
Compact Switch holder by Andyjoensen is licensed under the Creative Commons - Attribution license.
http://creativecommons.org/licenses/by/3.0/

# Summary

Switch stand

This is a two-part compact switch stand which is made in Autodesk Fusion 360. 

The model should be ready for printing as soon as the model is downloaded. 

Settings:

Infill, 20%.

Layer height, 0.15mm.

With Support.

With Build Plate Adhesion.


Further comments

I am aware that the switch does not fully fit into to slots of the stands. However, this is because I personally don't want my switch to rub up against the plastic every time I put it into and out of the components as I am afraid this will scratch the glass after prolonged use. However, feel free to customize this design as you like, this is just my personal preferen

# Post-Printing

![Alt text](https://cdn.thingiverse.com/assets/98/ef/fc/bf/5a/aaa.jpg)
Stand, alone (comma does a lot in just those two words)