                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


http://www.thingiverse.com/thing:3479649
Folding tripod for smartphone by magi71 is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://creativecommons.org/licenses/by-nc/3.0/

# Summary

3D MODEL DESCRIPTION 

Folding tripod for smartphone with tilt adjustment.
Feet connected to the body using 1.75 mm filament after piercing 2 mm.
Articulation using an M5 x 20 screw and an M5 nut.

Smartphone height from 72 mm to 92 mm

Pieces can be printed with a layer thickness of 0.15 mm.
It is necessary to improve the adhesion in order to avoid warping.

DESCRIPTION DU MODÈLE 3D

Trépied repliable pour téléphone portable avec réglage de l'inclinaison.
Fixation des pieds sur le corps à l'aide de filament 1,75 mm après avoir contre percé les articulations à 2 mm.
Articulation à l'aide d'une vis M5 x 20 et d'un écrou M5.

Hauteur smartphone de 72 mm à 92 mm

PARAMÈTRES D'IMPRESSION 3D

Les pièces peuvent être imprimées avec une épaisseur de couche de 0.15 mm.
Il est nécessaire d'améliorer l'adhérence afin d'éviter le gauchissement (warping).




# Custom Section

![Alt text](https://cdn.thingiverse.com/assets/44/6d/b7/33/53/VID_20190308_170238.gif)