                   .:                     :,                                          
,:::::::: ::`      :::                   :::                                          
,:::::::: ::`      :::                   :::                                          
.,,:::,,, ::`.:,   ... .. .:,     .:. ..`... ..`   ..   .:,    .. ::  .::,     .:,`   
   ,::    :::::::  ::, :::::::  `:::::::.,:: :::  ::: .::::::  ::::: ::::::  .::::::  
   ,::    :::::::: ::, :::::::: ::::::::.,:: :::  ::: :::,:::, ::::: ::::::, :::::::: 
   ,::    :::  ::: ::, :::  :::`::.  :::.,::  ::,`::`:::   ::: :::  `::,`   :::   ::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  :::::: ::::::::: ::`   :::::: ::::::::: 
   ,::    ::.  ::: ::, ::`  :::.::    ::.,::  .::::: ::::::::: ::`    ::::::::::::::: 
   ,::    ::.  ::: ::, ::`  ::: ::: `:::.,::   ::::  :::`  ,,, ::`  .::  :::.::.  ,,, 
   ,::    ::.  ::: ::, ::`  ::: ::::::::.,::   ::::   :::::::` ::`   ::::::: :::::::. 
   ,::    ::.  ::: ::, ::`  :::  :::::::`,::    ::.    :::::`  ::`   ::::::   :::::.  
                                ::,  ,::                               ``             
                                ::::::::                                              
                                 ::::::                                               
                                  `,,`


https://www.thingiverse.com/thing:2313700
SwitchRest - Nintendo Switch Headrest by benmarte is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
http://creativecommons.org/licenses/by-nc-nd/3.0/

# Summary

**Update: 5/24/2017**

  - Added locking mechanism to secure switch
  - Added switchrest-lock.stl (locking mechanism)
  - Modified switchrest-left and switchrest-right brackets
  - Added switchrest-complete.stl (all components ready to print in a single stl file)

I highly suggest you do some post processing on the locks either sand or file the portion that locks into the rails before using this or you will have a hard time getting them off and possibly break the side rails.

Once you can insert/remove the locks easily proceed to insert your Switch.

With these last changes I consider this completed and I don't plan on making further edits, suggestions are always welcomed.

Enjoy.

**Update: 5/15/17**

  - Added SwitchRest and Switch logos
  - Added angled bracket so switch air intake has breathing room to prevent overheating
  - Added correct printing position for all STLs
  - Added SwitchRest-Left-Right STL contains both brackets ready to print in correct position


I made this so my daughter could play the Nintendo Switch mounted to my cars headrest while we do road trips.

~~This is my initial prototype which I made in 1 hour so I might be making a few revisions but this works really well, we recently used it on a 4 hour trip and it withstood all the bumps you normally have when driving on the highway at 70mph.~~

I suggest you do a solid infill for best durability since these can be a bit tight when placing them on the switch and need a decent amount of force to be removed.

# Print Settings

Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 V2
Rafts: No
Supports: Yes
Resolution: 0.3mm
Infill: 100%

Notes: 
Import each stl individually or import **switchrest-complete.stl** which includes both rails and 2 locks.

Print with 100% infill so it doesn't break when inserting/removing the locks.