Here is a beautiful decorative Christmas tree with a star at the top. The tree has a recess for a Christmas bauble. The recess is 60mm. The bauble that I attached is about 35mm in diameter. To attach the bauble, I stuck a piece of toothpick into the 2mm recess and clamped the ring of the bauble there. It holds really well. The star has a hole at the bottom and the tree does the same. I printed these without support. The only support I used was for the recess for the base on the tree.
I printed everything in the respective color alone. If you arrange it correctly, you can fit everything on one printing plate. You could then print this all at once with MMU.
Height approx. 24cm
Width approx. 23cm
Tree thickness 15mm
Star 45x10mm
Credits:
NGTHRE