large Ishidoro

large Ishidoro

large Ishidoro

I found the original lamp design by AlCampCW to be a bit too small and some things didn’t fit right, so I redesigned it completely. So here is what’s different:

resized to be ~160mm tall (~175% of original size)
all part thicknesses adjusted for good proportions
all tolerances readjusted for this size and tight fit
feet now snap into place and hold without glue
the base has now an indent, making it easier to drill holes for switches and LEDs
screen is now more detailed (instead of just scaled up)
added roof variant, resembling a slight curve

You need to print:
2x BASE_LED-version
3x LEG
1x ROOF or ROOF-variant
2x SCREEN_triple
2x SMALL_SCREEN_triple

All files are optimized for printing with 0.2mm layer height.

Print Settings

Printer brand: Prusa

Printer: i3 MK3
Rafts: No
Supports: Doesn’t Matter
Resolution: 0.2mm
Infill: 15-20%
Filament_brand: Fillamentum
Filament_color: cinnamon / light wood tone
Filament_material: Timberfill
Notes: printed with 0.6mm nozzle. bases might need supports for the indent in the middle

Post-Printing

Assembly

Bend the screens, so they fit the notches and gently push them in. Insert the legs straight from below and tilt them up until they snap into place slightly.

Credits:

cordilon

Rate this 3D model

Download 3D models

File File size
zip large+Ishidoro 2 MB

Leave a Reply

Your email address will not be published. Required fields are marked *