Keep you fresh new Apple AirTags safe with these keyring vaults. Show your allegiance with different designs or just keep it simple with blank vaults.
These have very tight tolerances to keep the AirTag from shifting around in the vault. Be sure you extruder is calibrated and quality filament will produce perfect results.
Printed with Prusament PLA.
OBJ files with solid face plate and name plates are included for all you remixers. Happy printing 🙂
Print Settings
Printer brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 15
Filament brand: PolyMaker
Filament material: PLA
Notes:
Nozzle size: 0.4mm
Layer: 0.1mm
Perimeter: 4
Infill: 15%
Brim: Only if needed
Because the two halves fit together with very tight tolerances, pre-fit the two halves together without the AirTag in place and slide them in place a few times to ensure the parts are not binding up. Ensure both locking tabs are aligned proper when locking the halves together.
Install the AirTag into the face plate side first and you should hear a click when it is all the way in the face plate.
Credits:
jlee1026