Print two sides, one bottom and one back.
Slide sides into back, then bottom into sides and back.
Wide enough for sleeved playing cards.
Print at 0.3mm layer height with 15% infill.
Credits:
glenobie
Print two sides, one bottom and one back.
Slide sides into back, then bottom into sides and back.
Wide enough for sleeved playing cards.
Print at 0.3mm layer height with 15% infill.
Credits:
glenobie
File | File size |
---|---|
card-deck-tray-model_files | 114 KB |
DownloadFree3D.com