Basic cheese slice holder.
I’d suggest printing at 0.2 mm layer height. The design is optimized for that.
I’d suggest printing with a 0.4 mm nozzle.
~20% infill is fine – it’s just for the base. Make sure your settings are for 2 perimeters and that way the upright walls will print solid and cleanly.
PLA will print the best; PETG will cause a lot of stringing between the guide pieces.
Credits:
Canardiain
Download 3D models
| File | File size |
|---|---|
cheese-slice-holder-model_files
|
332 KB |