Inspired by Kernel770’s tripod I re-designed it from scratch. 🙂
The camPad is printed in flexible TPU and the rest in ecoPLA.
The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue.
Support is recommended when printing camMount
Hardware needed:
1 pcs M5x50 hex-head screw
1 pcs M5 nut
2 pcs M5x10 countersunk screws
2 pcs M5 Nyloc nuts
1 pcs 1/4 10mm screw
Credits:
Boopidoo
Download 3D models
| File | File size |
|---|---|
Compact+Tripod
|
3 MB |