This Companion Cube consists of separated parts to be able to print it with different colors and to use it as a storage box (hollow space: 99x99x99mm).
The parts made from the original model were not really symmetrical and so I made a few adjustments.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
10%
Instructions
You need the following quantity to build this Companion Cube (color/material is your choice off course):
6x Body_plate
6x Heart_insert
6x Heart_medal
8x Edge
12x Angle
In my case, I was simply able to press (with a bit of force) the “Heart_insert” parts into the “Heart_medal”s. The same applies to the medals and “Body_plate”s (rotate the medal in 90° steps if it does not fit). Tip: print each part once and test if this works. Otherwise process (rescale for example) the parts accordingly.
The “sticking_tool_top” and “*_bottom” are used to fix the plates and edges after applying glue on them (look at the photos to get the idea).
Credits:
Nuk1591