Use this customizable clamp to mount your smartphone on the air frame of your car.
Just measure or google the thickness and width of your smartphone and put them into the customizer app. Take into account the extra thickness or width when using a smartphone cover.
Most air frames are oriented horizontally, but if the air frame of your car is rotated at a certain angle, then you can rotate the clamp to keep your smartphone horizontal.
The clamp is easy to print and does not require any support.
To use it, just slide your smartphone sideways into the clamp, and then mount the clamp on your air frame. Make sure your smartphone fits tightly in the bracket (it shouldn’t be able to move around). The clamp should also fit tightly on the air frame. If this isn’t the case, better print a new clamp.
That’s it! enjoy!
update 17/07/2016:
Just wanted to say thanks to anyone who has liked, collected, downloaded and/or printed the model. It makes me feel good to know that this is something which is useful for a lot of people.
I highly recommend printing this model in ABS. If you print it in PLA and leave it on the air frame for days, it will deform and loose it’s clamping force. Also, when printed in PLA, do not turn on the heath because the clamp will deform!
Apparently, using values like 70.00 and 70. generate errors in customizer (but not in openscad). I added a note in the code to remind users of this.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker Original
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.4 mm or lower resolution
Infill:
100%
Notes:
printed in PLA
Credits:
RevisonNr3
Download 3D models
| File | File size |
|---|---|
customizable_smartphone_holder_for_car
|
731 KB |