Drink organizer.
Have always cold drinks, thanks to this dispenser, fill the dispenser up to 9 units.(33 cl Diam 66 x 115 lenght)
The bottom drink is always the coldest.
only 130 wide x 170 high x 330 deep, designed for fridge.
Full print with 3x4x4 walls/top/bottom and aprox 20% infil came to about 140g+140g in weight.
Model 2 pieces for bed 300 x 300 mm rotation 45 degrees. (2 models full)
Model 2 + 2 pieces for 220×200 beds (4 models little)
Added slim model, smaller dimensions and only 75 grams (always bed 300×300)
I have also added the CAD files
You do not need extra parts, only fit tightly, in case of loose parts you can put a little glue on the lace
For other dimensions:
The design is prepared for a can of Diameter 66 x 115 in height. If you have other dimensions it is very easy to adapt it by scale. For example, a can with a diameter of 55/66 = 0.878 of scale in X and Y axis, if it has a length of 146/115 = 1.27 of scale in Z.
So you can make the design for any can, I have added a photo to understand.
Print Settings
Printer: Two trees Sapphire Plus
Rafts: No
Supports: No
Resolution: 200
Infill: 30
Filament brand: Pla Fervi Esencial, Petg
Filament material: PLA-PETG
Credits:
ljhtom
Download 3D models
| File | File size |
|---|---|
Drink+dispenser
|
4 MB |