Foldable pocket Mobile Phone Tripod / Faltbarer Taschen Handy Tripod

Foldable pocket Mobile Phone Tripod / Faltbarer Taschen Handy Tripod

Foldable pocket Mobile Phone Tripod / Faltbarer Taschen Handy Tripod

Foldable pocket Mobile Phone Tripod / Faltbarer Taschen Handy Tripod

Who doesn’t know that, you want to take a picture with your smartphone, possibly a self-timer, but the mobile phone wobbles around.

With this foldable bag Tripod these problems are past…

The Tripod generally needs “no” screws, and can be printed completely (only a drop of superglue is needed)!

There is a possibility to insert a M6x20mm on both sides into the ball head. Thread up/down, space for a nut available.

Mobile phone can’t be thicker than 11mm! If you need a different size, just leave a comment!

There are also holes so that you can additionally (actually not necessary) fasten the phone with a rubber band.

Should also work with small cameras (simply insert the appropriate screw connection).

Dimensions folded together: max. 145mm x 40mm x19mm (rectangular)
Dimensions folded out: r= 95mm, h=135mm (without telephone)
M5 screws also work!

Wer kennt das nicht, man will mit dem Smartphone ein Foto evtl. mit Selbstauslöser machen aber das Handy wackelt herum.

Mit diesem faltbaren Taschen Tripod sind diese Probleme vorbei…

Der Tripod benötigt generell “keine” Schrauben, und kann komplett gedruckt werden (nur ein Tropfen Sekundenkleber wird benötigt)!

Trotzdem besteht die Möglichkeit eine M6x20mm beidseitig in den Kugelkopf einzusetzen. Gewinde nach oben/unten, Platz für eine Mutter vorhanden.

Handy darf nicht dicker als 11mm sein! Falls ihr ein anderes Maß benötigt, hinterlasst einfach einen Kommentar!

Es gibt außerdem Löcher damit man zusätzlich (eigentlich nicht notwendig) das Telefon mit einem Gummiband befestigen kann.

Sollte auch mit kleinen Kameras funktionieren (einfach die passende Verschraubung einsetzen).

Maße zusammmen gefaltet: max. 145mm x 40mm x19mm
Maße ausgeklappt: r= 95mm, h=135mm (ohne Telefon)
M5 Schrauben funktionieren auch!

Habt Spass, liked, und teilt Eure Makes

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

Yes

Resolution:

0.20

Infill:

50

Filament: no name PETG black / white

Notes:

only the handy mount need support!

Credits:

SolarGermany

Rate this 3D model

Leave a Reply

Your email address will not be published. Required fields are marked *