Ever needed to prop up your laptop or tablet at a more comfortable angle. This compact folding stand will prop up the laptop or tablet at approximately 18 degrees.
The stand folds down to approximately 8.5 inches (220mm) x 0.75 inch (24mm).
This is commercially available to purchase as well. But why not try printing one yourself 🙂
This does require well calibrated printer due to the tight tolerance. There is an 0.4mm air-gap and do not use supports for this print. This took 9h55m at 0.2mm layer height and 15% infill.
Happy printing 🙂
Print Settings
Printer brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15-20
Filament brand: Prusametn
Filament material: PLA
Credits:
jlee1026