Simple and easy to print headphone hanger for desks (suitable for table tops 20-28mm thick).
For this part I recommend PETG material due to its higher mechanical strength (needed for the spring clamp).
Additionally, the part has a deepening of 30x20mm on the upper “arm”. A self-adhesive rubber/foam tape should be added to this area and serve as a grip between the hanger and the table.
i.e. I’ve used this one
Print Settings
Printer: Anycubic i3 Mega
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament brand: eSUN
Filament color: Black/White
Filament material: PETG
Notes:
Extruder temp: 230°C
Heatbed: 70°C + Blue-tape
Credits:
brunofuentes