Most headphone stands seem to forget about the cable. So I designed my own with a hollow base to allow the cable to be hidden away.
The Image is shown with a custom logo but a solid top is provided so you can add any logo you want.
The top is a tight fit on the risers and it may require a little sanding, but the top support piece will cover all sanding marks. The Top support is not interference fitted. Due to tolerance stack up on my printer the support piece will require glue. I suggest you slide the support over the risers, attach the top, then add some glue near the top on the risers and slide the support up to match the top.
The accent pieces lightly snap together but I suggest a drop of superglue on all of the joints.
Credits:
Riven02