Desk Dock for iPhone 12 Magsafe charger. Holds MagSafe charging puck to create a phone mount / charging stand. Puck is held in by 3 8-32 set screws in tapped holes (but you really only need the top one). Cavities on the bottom are to glue in 1/4 x 1/4 x 3/4 in magnets to make the mount stick to ferrous surfaces.
Printed on a Carbon, tolerances may need to be tweaked for filament printers.
Print Settings
Printer: Carbon
Rafts: No
Supports: No
Post-Printing
tap holes, add puck with set screw.
Tap at least the top hole at #8-32 and use a set screw to hold in charging puck.
Crdits:
jazzlw