Today I’ve got something hot off the printer for all you iPhone 7 Plus owners out there. After designing a few iPhone 7 cases I had a number of requests to make the same cases for the iPhone 7 Plus. I’ve used the same minimalist look while still making it easily printable. It’s designed to protrude slightly on the front and back to absorb any knocks, scratches and impacts… plus it let’s your phone cool down much better than a full case will 🙂
############ UPDATE 2: #############
There’s now two versions of this case. The original design and a newer version that is 0.2mm longer in length and width. The slightly more loose version is denoted with 02mm in the name. My personal preference is for the original design but YMMV.
Here’s a link to a video showcasing the original iPhone 7 bumper but since it’s essentually the same but smaller I thought it would be useful to see:-
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
25%
Notes:
I suggest 4 perimeters with 4 top and bottom layers. Just be aware that some older PLA is quite brittle and can crack when fitting. Most new PLA is much tougher but you’ll still need to be careful when inserting and removing your phone.
Credits:
ScottyMakesStuff
Download 3D models
| File | File size |
|---|---|
iPhone_7_Plus_Slim_Bumper_Case
|
4 MB |