A simple laptop stand I designed, easily capable of holding heavy laptops. It’s 245x170mm
There’s a 0.25mm tolerance on the connector clip, should be reasonable enough but if you need more I’ll happily upload it.
If you need a shorter variant of the connector, I’ll also happily upload one. (when rotated 45° it’s 225x225mm)
Print the stand twice, the connector once (it’s more to keep them together and standing)
Print Settings
Printer: HyperCube Evolution
Rafts: No
Supports: No
Resolution: 0.3mm
Infill: 10%
Filament: GEEETECH PLA
Notes:
3 walls, 0.4mm nozzle
Credits:
ManIkWeet