Laptop Stand v1
For Laptop PCs used as a vertical or horizontal Laptop support for 13” 15” 17” or 19” screens
Do you want to use your closed computer as a tower or do you prefer to lift it to work or let the air flow to play?
This idea came out of necessity, but I have many other ideas in mind that I would like to share, follow me on my networks for more!
The version that I have shared does not have any drawing, the ones in the photos is for my personal use
Print!
For efficient printing, better print files “Front, Back, Hinge and 2xStick stand” files. Place both front and back stands on one of its lateral faces to make better holes without supports or simply place them on their bases without supports for smaller printers. Place the hinge on its flattest face and the two rods on any of its long faces without supports.
More:
Follow me on my spanish Twitch channel
Ask me whatever you want in my Discord Channel
Or follow my Twitter and Youtube channel!
Print Settings
Printer brand: Ultimaker
Printer: Ultimaker 3
Rafts: No
Supports: Doesn’t Matter
Resolution: 0.24
Infill: 25%
Filament_brand: Generic
Filament_color: Black
Filament_material: PLA or ABS
Notes:
For efficient printing, better print files “Front, Back, Hinge and 2xStick stand” files.
Remember print 2 sticks for each rotation axis.
Place both front and back stands on one of its lateral faces to make better holes without supports or simply place them on their bases without supports for smaller printers.
Place the hinge on its flattest face and the two rods on any of its long faces without supports.
I printed my design in PLA without supports, but it doesn’t matter.
Post-Printing
Assembly
Put the flat part of the hinge up and lay down the two large supports on their largest surface, adjust the holes in line and insert the sticks through them.
You can fix the position of the sticks at their ends with silicone.
Credits:
javisousa20
Download 3D models
| File | File size |
|---|---|
Laptop+Stand+2x1
|
3 MB |