Simple holder to hold your macbook up.
If you are interested in editing this file for another macbook, please contact me.
For the printing you need to rotate the part 90 degrees to the left.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20-30%
Notes:
I used 5 walls to print this. sliced it with cure and printed it on my ANET A8.
Infill was 30% but that is high. if your printer can print bridges maybe even lower the infill. I used the grid pattern. Printed it in white PLA. 210 extruder and 60 bed.
How I Designed This
Design
I made this with fusion 360 and sliced it with cura.
Credits:
Rogierrzz