It is a universal set of holders and arms. You can use this system as a notebook holder, tablet holder, monitor holder, camera or any other device holder or you can have it as a shelf holder.
If you print a pair, you can made various tables.
You can attach more arms togehter. I made some connecting parts and other accessories.
There are no limits to imagination.
I made it with increased strength and durability. If you add few perimeters the holders/arms can hold pretty good weight.
Small light version
Holders reduced x 0.6 and then adjusted (hole sizes, gaps, etc.)
I will add it later. I dont want to show the models before I use it by myself and know if it works. It might take some time, my second printer doesn`t work right now.
Information
|
You can adjust the angle in ten degrees. Screw and nut fit on both sides.
|
| You can tight and loose from both sides no matter where the nut is. |
 |
 |
There are various nuts and screws.
Of of them counts with the allen screw (hex bolt) M8x40
|
| You can also print the crew which can be tight and loose without gear- with the printed hex bolt screw. |
 |
  |
The holes for key in the screw and two arms have the same size as the holders in Honeycomb storage wall (https://www.printables.com/cs/model/152592-honeycomb-storage-wall). That means that you can hang different accessories on the arms.
|
| There are various of arms. |
 |
 |
Clamp
I made 3 different types –
|
 |
VESA rotating holder – 75mm |
Combination for possitioning along the axis Z
|
System – high table for tablet holder
|
 |
There are holders for three tablets.
Bottom width
screw spacing 30mm |
Basic arms
The only difference is the grid
Holders
A few basic handles
I printed small parts on the Prusa Mini, the arms on the Ender 3.
My printing settings
- material: PETG
- perimeters: 8 and more
- infill : 30% and more
- layer height 0.3 (with nozzle 0.6 layer height 0.4) (screw and nuts only 0.2mm layer height)
Credits:
RostaP
Download 3D models
| File | File size |
|---|---|
multifunction-arm-mounting-system-model_files
|
9 MB |