Mount your Playstation 4 on the wall!
Mine is upside-down because I wanted it on the left side of my bookshelf. Yours should probably go right-side-up if it can, but I don’t really have a good reason for thinking that. Cooling? Maybe? But there’s a fan so it probably doesn’t matter.
Note that the files are named “top” and “bottom,” which represent a right-side-up orientation (so, in my case, “top” is at the bottom. Cool?).
The vents are barely blocked much by this design, so it has that going for it, which is nice.
I wouldn’t recommend this for horizontal mounting (e.g., under a shelf). The little bumps are there to hold the PS4 in place, not to support its full weight. The chunky shelf part takes the weight. Mounting horizontally would put all the load on the little nubbinses, which could be a disaster.
Please excuse the filament in the photos. I know you understand.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0 for top piece – ~25% for bottom
Notes:
I printed the bottom mount with 25% infill for strength and kept the top mount hollow for faster printing (top doesn’t support weight, y’see).
Credits:
jameswood
Download 3D models
| File | File size |
|---|---|
PS4_Wall_Mount
|
398 KB |