When setting a Xbox One X vertically on its side, it needs a stand to elevate the console so its cooling vents are not blocked.
This stand was designed to be fast to print. When printing with normal 0.4mm nozzle and slicer set to 1.2mm walls, this would print as a continuous curve for a six-wide shape without worrying about top, bottom, or infill. It should also mean little to no retracts, and obviously no support would be needed.
This loop shape will be somewhat flexible, which will help it conform to tabletops that are not completely flat. It does mean the console may wobble a bit if bumped, such is the tradeoff.
Print Settings
Printer: MatterHackers Pulse XE
Rafts: No
Supports: No
Resolution: 0.3mm
Infill: N/A
Filament_brand: MatterHackers
Filament_color: Black
Filament_material: PETG
Notes:
These pictures show it printed with MatterHackers black PETG, but it should work with any filament.
How I Designed This
Onshape CAD file is publicly [available here](https://cad.onshape.com/documents/58401e6f94406a32e62dc50e/w/3f7a35c3d7c59adf87717a82/e/553c0f32f027ce969ee5d205)
Credits:
Regorlas
Download 3D models
| File | File size |
|---|---|
Quick+Print+Xbox+One+X+Vertical+Stand
|
152 KB |