Wanted a remote holder that we could both reach.
I know the bracket is pretty specific to my headboard.
Here is info if you want to create your own bracket/mount:
The posts are on 30mm centers.
The narrow part is 5mm radius and 3mm tall
The top part is 7.5mm radius and 1.5mm tall.
I put a fillet on the bottom edge of the retainer (top part) but I’m sure it would be fine without that.
Print Settings
Printer brand: Creality
Printer:Ender 3
Rafts: No
Supports: No
Resolution: 0.4 mm nozzle, 0.2 layers
Infill: 20%, cubic
Filament brand: any
Filament color: any
Filament material: PLA
Notes:
For Basket: set wall line count to 4 (thickness 1.6 mm)
This makes a much quicker and cleaner print since the basket walls are “all wall” and don’t need any infill.
For Bracket 0.4 mm nozzle @ 0.2 mm layer height defaults should be fine. Print on side of course. Should use support because of the posts.
Credits:
renrip