Screw Adjustable Phone Stand
Just what everyone needs, an overly complicated phone stand!
Print Tips:
Print the screw laying on it’s side with supports.
Print the base without supports.
Print the link on it’s side so that layers go through the pins.
If the knob is loose, glue it.
The capture frame should be a tight press fit.
Assembly:
Put the nut on the screw.
Pop the screw into the base, back end first then the from should squeeze in.
Make sure the nut has the hole side facing into the base!!
Insert link into the tray with the longer end so that it snaps.
Insert the tray and link into the base and nut respectively.
Press the capture frame into the base to retain the tray and link.
Print Settings
Printer brand: Creality
Printer: Ender 3
Resolution: 0.16
Infill: 20%
Filament brand: Any
Filament color: Grey/Black
Filament material: PLA or Other
Notes:
Any material does the trick.
Credits:
amarten1
Download 3D models
| File | File size |
|---|---|
Screw+Adjustable+Phone+Stand
|
3 MB |