I printed a desktop solar lamp as a headphone holder. Inside is a Led strip with multi colour option. I forget the skirt at least. Now I have one single printed line around the solar system name:)
Print Settings
Printer: Artillery Sidewinder X1
Rafts: No
Supports: No
Resolution: 0.3 and 0.2
Infill: 10%
Filament brand: No name
Filament color: Black, Red, Transparent and White
Filament material: PLA
Notes:
Solar-Lamp Body:
0.3 mm layer height. 120 mm/s Speed. 205° C Nozzle and 70° C Bed (Layer 3 = 50° C).
I split this print into serval pieces for colour changing (see the attached sketch!).
With each layer change, I put the settings without the bottom and top layers.
Be careful with the heights of the printers frame. If you print the body and you have choose a wrong position on the bed, the printer might be hit the printed part for homing all axis!
Solar-Lamp Front:
80 mm/s. 100 % infill for the symbols. The transparent part is 5 mm in height and the infill is also 10 % honeycomb.
Credits:
Aquaboy1987
Download 3D models
| File | File size |
|---|---|
Solar+Lamp+and+Headphone+Holder
|
2 MB |